Ricoh SAVIN D0AP - Page 17

SM xi D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1
Paper Size Codes ............................................................................................. 6-78
6.3.3 SENSOR POSITION LAYOUT ....................................................................... 6-79
6.4 IMAGE ADJUSTMENT ............................................................................................ 6-81
6.4.1 REGISTRATION ADJUSTMENT.................................................................... 6-81
6.4.2 IMAGE POSITION ADJUSTMENT................................................................. 6-82
6.4.3 SCANNER, SPDF IMAGE ADJUSTMENT ..................................................... 6-83
Scanner Image Adjustment ................................................................................ 6-83
SPDF Image Adjustment ................................................................................... 6-84
6.5 OTHER TROUBLESHOOTING ................................................................................ 6-86
6.5.1 PAPER FEED (SKEW) .................................................................................. 6-86
6.5.2 PROBLEM AT REGULAR INTERVALS .......................................................... 6-86
6.5.3 WHEN VERTICAL LINE OF 8MM IS GENERATED ....................................... 6-88
6.5.4 WHEN VERTICAL BANDING IS GENERATED.............................................. 6-88
6.5.5 WHEN VERTICAL LINES, BANDS CAUSE UNEVEN DENSITY (MF MODEL
ONLY)...................................................................................................................... 6-88
6.5.6 IMAGE AREA OR BACKSIDE BECOMES DIRTY WHEN FREQUENTLY
PRINTING ON SMALL-SIZE PAPER ....................................................................... 6-92
6.5.7 RECYCLED OR THIN PAPER IS SEVERELY CURLED AFTER PRINTING .. 6-93
6.5.8 POOR IMAGE QUALITY WHEN USING SHINY MATERIALS MODE ............ 6-93
6.5.9 UNEVEN IMAGE DENSITY ........................................................................... 6-94
6.5.10 HORIZONTAL WHITE BANDS 94 MM APART............................................... 6-95
6.5.11 EXCESSIVE CURL WHEN PRINTER IN THICK PAPER 3 MODE ................. 6-96
6.5.12 DEFECTIVE IMAGES WHEN PRINTING ON ENVELOPES .......................... 6-97
6.5.13 WRINKLES OCCUR ON PRINTED ENVELOPES ......................................... 6-98
6.5.14 WATER SPOTS FROM CONDENSATION..................................................... 6-99
6.5.15 STAINED LEADING EDGES WHEN MANUAL DUPLEX PRINTING
POSTCARDS OR THICK PAPER ..........................................................................
6-100
6.5.16 BLACK SPECKLES IN IMAGES .................................................................. 6-101
6.5.17 PRINTED BARCODES CANNOT BE READ ................................................ 6-102
6.5.18 EXCESSIVE CURL REDUCES EXIT TRAY CAPACITY ............................... 6-102
6.5.19 STACK ERROR (SPILLING OF THE PAPER STACKED IN THE OUTPUT TRAY)
6-103
6.5.20 TO PREVENT ACCIDENTAL POWER CORD DISCONNECTION ............... 6-104
6.5.21 PAPER FEED TRAY SIDE FENCE AND END FENCE FASTENERS ........... 6-105
6.5.22 FLUORESCENT LAMP, X-RAY LIGHT, OR LED FLICKER .......................... 6-106
6.5.23 SUPPRESSING MAXIMUM POWER CONSUMPTION ............................... 6-107
6.5.24 FIBROUS DEPOSITS OCCUR ON THE BACK SIDES OF PAPER AT THE
LEADING EDGES ................................................................................................. 6-108
6.5.25 TEARS OCCUR AT THE LEADING EDGES OF PAPER...............................6-111