The settings of the safety functions are protected by a password.
Settings that are not changed when restoring the factory setting
The communication settings and the settings of the motor standard (IEC/NEMA) are kept when
restoring the factory setting.
6.6.1 Restoring the factory settings/delivery condition (without safety functions)
Procedure with Startdrive
1. Go online with the converter.
2. Select the command as follows from the project tree:
3. For the G115D wall-mounted converter, select the menu option as follows to restore to the
factory settings:
For the G115D motor-mounted converter, select the menu option as follows to restore to the
delivery condition:
4. Click on the button.
5. Wait until the converter has been reset to the factory settings/delivery condition.
Commissioning
6.6Restoring the factory settings
SINAMICS G115D Wall Mounted distributed drive
126 Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA
To Next Page
Loading...
