Siemens SINAMICS G115D

Number Name Factory setting
p1043[0...n] BI: Motorized potentiometer, ac‐
cept setting value
Signal source for accepting the setting value. The
motorized potentiometer accepts the setting value
p1044 on signal change p1043 = 0 → 1.
Factory setting: 0
p1044[0...n] CI: Motorized potentiometer, set‐
ting value
Signal source for the setting value
Factory setting: 0
Further information
For more information about the motorized potentiometer, refer to function diagram 3020 in the
List Manual.
7.17.5 Fixed speed setpoint as setpoint source
Function description



)L[HGVSHHGVHWSRLQW
6HOHFWLRQ
)L[HGVSHHGVHWSRLQW
)L[HGVSHHGVHWSRLQW
)L[HGVSHHGVHWSRLQW
DFWLYH
0DLQVHWSRLQW
6FDOLQJ
6FDOLQJ
6XSSOHPHQWDU\VHWSRLQW
S
S
S
U
U
S
U
The converter makes a distinction between two methods when selecting the 󹪝xed speed
setpoints:
Directly selecting a 󹪝xed speed setpoint







)L[HGVHWSRLQWVHOHFWLRQELW
)L[HGVHWSRLQWVHOHFWLRQELW
)L[HGVHWSRLQWVHOHFWLRQELW
)L[HGVHWSRLQWVHOHFWLRQELW
)L[HGVHWSRLQW
)L[HGVHWSRLQW
)L[HGVHWSRLQW
)L[HGVSHHGVHWSRLQW
HIIHFWLYH
)L[HGVHWSRLQW
U
S
S
S
S
S
S
S
S
Advanced commissioning
7.17Setpoints
SINAMICS G115D Wall Mounted distributed drive
262 Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA