Siemens SINAMICS G115D

In JOG mode, the same ramp-function generator is active as for the ON/OFF1 command.
Parameters
Parameter Description Setting
p1120[0...n] Ramp-function generator, ramp-
up time [s]
Sets the ramp-up time for the ramp-function gen‐
erator.
Factory setting: 1
p1121[0...n] Ramp-function generator, ramp-
down time [s]
Sets the ramp-down time for the ramp-function
generator.
Factory setting: 1
p1058[0...n] Jog 1 speed setpoint [rpm] Sets the speed for JOG 1.
Factory setting: 150
p1059[0...n] Jog 2 speed setpoint [rpm] Sets the speed for JOG 2.
Factory setting: -150
p1082[0...n] Maximum speed [rpm] Sets the highest speed.
Factory setting: 1500
7.9 Conveyor technology control functions (for G115D PROFINET
and AS-i variants only)
Overview
Conveyors are devices used for movement of materials, products and loads throughout a
manufacturing or distribution facility. Conventionally, the conveyor technology control is
implemented in the PLC controller. By transferring the functionality to the converter, the
conveying process starts via the PLC while stops depending on the sensor(s) wired directly to the
converter. In this case, the materials conveyed can always come to a standstill at the same point
independent of the cycle time of the PLC controller.
The SINAMICS G115D PROFINET and AS-i variants (I/O variants not supported) o󹪜er 󹪞exible
and e󹪟cient solutions for the conveyor technology requirements of various horizontal or
inclined applications in such industrial sectors as intralogistics, automotive, and airport.
Note
To make sure that the conveyor control function works properly on the SINAMICS G115D AS-i
variant, you must select Macro 31 or 34. For more information on the wiring arrangement, See
Section "Factory interface setting (Page82)".
Applications
• Roller, belt, or chain conveyors
• Turntables
Advanced commissioning
7.9Conveyor technology control functions (for G115D PROFINET and AS-i variants only)
SINAMICS G115D Wall Mounted distributed drive
Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA 185