Siemens SINAMICS G115D User Manual

Figure12-31 Example of an oil expansion unit size 109
12.3.22 Faults, causes and remedies
Note
Faults and malfunctions that occur during the warranty period and requiring repair work on the
gearbox must be remedied only by Technical Support. If faults occur without a clearly
identi󹪝able cause after the warranty period has elapsed, Siemens AG recommends the services
provided by Technical Support.
If you need the help from the Technical Support, please have the following information ready:
• Rating plate data
• Nature and extent of the fault
• Suspected cause
Additional information on the SIMOGEAR geared motor
12.3Speci󹪝c data gearbox
SINAMICS G115D Wall Mounted distributed drive
510 Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA

Siemens SINAMICS G115D Specifications

General

Type	SINAMICS G115D
Frequency Range	0 Hz to 550 Hz
Safety Integrated	STO (Safe Torque Off)
Relative Humidity	5% to 95% (non-condensing)
Mounting Type	Wall-mounted
Input Voltage	380 V to 480 V AC
Communication Interfaces	PROFIBUS, PROFINET, USS, Modbus RTU
Control Method	Vector Control
Shock Resistance	IEC 60068-2-27
Protection Class	IP65