Siemens SINAMICS G115D User Manual

1131 Shim 1420 Vent 󹪝lter
1132 Supporting disk/shim  
Figure12-73 Bevel gearbox K, frame sizes39-109
12.3.33.6 Helical worm gearbox C, sizes29-89
Note
For gearbox size 29, Siemens recommends replacement of the gearbox if service is required.
Parts subject to wear are available on request.
Additional information on the SIMOGEAR geared motor
12.3Speci󹪝c data gearbox
SINAMICS G115D Wall Mounted distributed drive
Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA 575

Siemens SINAMICS G115D Specifications

General

Type	SINAMICS G115D
Frequency Range	0 Hz to 550 Hz
Safety Integrated	STO (Safe Torque Off)
Relative Humidity	5% to 95% (non-condensing)
Mounting Type	Wall-mounted
Input Voltage	380 V to 480 V AC
Communication Interfaces	PROFIBUS, PROFINET, USS, Modbus RTU
Control Method	Vector Control
Shock Resistance	IEC 60068-2-27
Protection Class	IP65