Siemens SINAMICS G115D

12.1.3.2 Painted version
The corrosion protection system is classi󹪝ed according to the corrosiveness categories in
DINENISO12944‑2.
Paint according to corrosiveness categories
Paint system Description
Corrosiveness category C1, unpainted for gearbox and motor housings made of aluminum
-
• Indoor installation
• Heated buildings with neutral atmospheres
• Resistance to greases and some resistance to mineral
oils, aliphatic solvents
• Standard
Paint system Description
Corrosiveness category C1 for normal environmental stress
1‑component hydro paint, top coat
• Indoor installation
• Heated buildings with neutral atmospheres
• Resistance to greases and some resistance to mineral
oils, aliphatic solvents
• Standard paint for gearbox housings made of cast iron
Paint system Description
Corrosiveness category C2 for low environmental stress
2‑component - polyurethanetop coat
• Indoor and outdoor installation
• Unheated buildings with condensation, production
areas with low humidity, e.g. warehouses and sports
facilities
• Atmospheres with low levels of pollution, frequently
rural areas
• Resistance to greases, mineral oils and sulfuric
acid(10%), caustic soda(10%) and is conditionally
resistant to aliphatic solvents
Additional information on the SIMOGEAR geared motor
12.1General information geared motor with SINAMICS G115D Motor Mounted / Wall Mounted
SINAMICS G115D Wall Mounted distributed drive
Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA 429