Siemens SINAMICS G115D

10.6.1 Preparing the memory card
Overview
You can load the converter 󹪝rmware from the Internet to a memory card.
Precondition
You have the appropriate memory card.
Memory cards (Page352)
Procedure
1. Download the required 󹪝rmware to your PC from the Internet.
Download (https://support.industry.siemens.com/cs/ww/en/view/67364620)
2. Extract the 󹪝les to a directory of your choice on your PC.
3. Transfer the unzipped 󹪝les into the root directory of the memory card.
Depending on the 󹪝rmware, the 󹪝lenames and the number of 󹪝les may di󹪜er from the display
above.
The "USER" directory does not exist on unused memory cards. After the memory card is
plugged in for the 󹪝rst time, the converter creates a new "USER" directory.
You have prepared the memory card for the 󹪝rmware upgrade or downgrade.
❒
10.6.2 Upgrading the 󹪝rmware
Overview
When upgrading the 󹪝rmware, you replace the converter 󹪝rmware with a newer version.
Precondition
• Converter and memory card have di󹪜erent 󹪝rmware versions.
• You have the memory card with the 󹪝rmware for that particular converter.
Corrective maintenance
10.6Firmware upgrade and downgrade
SINAMICS G115D Wall Mounted distributed drive
Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA 403