Siemens SINAMICS G115D

Note
Check that the technical speci󹪝cations are in accordance with the purchase order.
Inspect the delivery immediately on arrival for completeness and any transport damage.
Notify the freight company of any damage caused during transport immediately (this is the only
way to have damage recti󹪝ed free of charge). Siemens will not accept any claims for missing or
incorrect items submitted at a later date.
The gearbox or geared motor is delivered in a fully assembled condition. Additional items are
shipped in separate packaging if applicable.
The products supplied are listed in the dispatch papers.
12.1.5 General information on transport
NOTICE
The use of force will damage the gearbox or geared motor
Transport the gearbox or geared motor carefully. Avoid knocks.
Before putting the drive into operation, remove any transport 󹪝xtures and keep them safe or
render them ine󹪜ective. You can then use them again for transporting further items or you can
apply them again.
Di󹪜erent forms of packaging may be used, depending on the size of the gearbox or geared
motor and the method of transport. Unless contractually agreed otherwise, the seaworthy
packaging complies with HPE Packaging Guidelines (Bundesverband Holzpackmittel Paletten
Exportverpackungen e.V., the German Federal Association for wooden packaging, pallets,
and export packaging).
Note the symbols which appear on the packaging. These have the following meanings:
This way up Center of gravity
Fragile Do not use hand hook
Additional information on the SIMOGEAR geared motor
12.1General information geared motor with SINAMICS G115D Motor Mounted / Wall Mounted
SINAMICS G115D Wall Mounted distributed drive
432 Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA