Parameters
Conveyor technology control parameters (Page220)
7.9.2 Turntables
A turntable in a conveyor system redirects the material at the crossing of two conveyor lines. The
turntable rotates from one end position to the other in the direction depending on the setting
of the end position shutdown (p3392) and the polarity of the speed setpoint.
Advanced commissioning
7.9Conveyor technology control functions (for G115D PROFINET and AS-i variants only)
SINAMICS G115D Wall Mounted distributed drive
194 Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA
To Next Page
Loading...
