Siemens SITRANS F - Active Operation (Read Only); Fail-Safe Activation Condition; Current Output

Setup
3.4 Inputs and outputs
FST030
132 Function Manual, 04/2017, A5E35693328-AA
Related
Path
Setup → Inputs and outputs → Channel 3 - input/output → Change operation mode
3.4.5.3
Active operation (read only)
Description
Shows application possibilities.
Setting Active operation not possible, use passive wiring; Active operation possible, hardware is
able to drive the current loop
Default
-
Related
Path
Setup → Inputs and outputs → Channel 3 - input/output → Active operation
3.4.5.4
Fail-safe activation condition
Description
Defines the condition the fail-safe behaviour of the channel becomes active and determines
the channel availability.
Setting
Invalid process value; Maintenance alarm or Failure (NAMUR)
Default
Maintenance alarm or Failure (NAMUR)
Related
Path
Setup → Inputs and outputs → Channel 3 - input/output → Fail safe activation condition
3.4.5.5
Current output
3.4.5.5.1 Pulse value
Description
Select process value for the current output.