Siemens SITRANS F - Firmware Update Change Log; Clear FW Update Change Log (Expert); Self Test; Display Test

Maintenance and diagnostics
4.10 Self test
FST030
306 Function Manual, 04/2017, A5E35693328-AA
4.9.3
Firmware update change log
Description
A list of logged firmware updates can be viewed in this parameter. Up to 20 logs can be
listed with timestamp in the format YYYY-MM-DD hh-mm.
Path
Maintenance and diagnostics → Audit trail → Firmware update change log
4.9.4
Clear FW update change log (expert)
Description
The firmware update log can be reset using this parameter.
Setting Cancel; Ok
Default
Cancel
Related
Path
Maintenance and diagnostics → Audit trail → Clear FW update change log
4.10
Self test
4.10.1
Display test
Description
The display can be tested using a wizard..
Path
Maintenance and diagnostics → Self test → Display test
4.11
Resets
4.11.1
Restore ordered configuration (write only)
Description
Command to set all parameters to their defined default values.