Siemens SITRANS F - 3 Rd Value; 4 Th Value

Setup
3.6 Local display
FST030
220 Function Manual, 04/2017, A5E35693328-AA
Setting
Transmitter internal temperature; DSL temperature; Measured current CH5; Measured
current CH6; Ch1 value; Ch3 value; Ch4 value; Auxiliary temperature; Sensor temperature;
Reynolds number; RxGain up path 1; RxGain down path 1; SNR up path 1; SNR down
path 1; Sound velocity path 1; Flow velocity path 1; Delta time path 1; Travel time up path
1; Travel time down path 1; Correlation factor path 1;
Percentage of bursts accepted path1;
Peak amplitude up path 1; Peak amplitude down path 1; Min acc travel time path 1; Min
acc travel time path 1; Max acc travel time path 1
Default
Flow velocity path 1
Related
This parameter is only available if
View
is set to Three Values, Six Values or Six Diagnostic
Values.
Path
Setup → Display → View 4 → 2nd Value
3.6.8.5
3rd value
Description
The display
3rd Process Value
can be selected.
Setting
Transmitter internal temperature; DSL temperature; Measured current CH5; Measured
current CH6; Ch1 value; Ch3 value; Ch4 value; Auxiliary temperature; Sensor temperature;
Reynolds number; RxGain up path 1; RxGain down path 1; SNR up path 1; SNR down
path 1; Sound velocity path 1; Flow velocity path 1; Delta time path 1; Travel time up path
1; Travel time down path 1; Correlation factor path 1; Percentage of bursts accepted path1;
Peak amplitude up path 1; Peak amplitude down path 1; Min acc travel time path 1; Min
acc travel time path 1; Max acc travel time path 1
Default
Sound velocity path 1
Related
This parameter is only available if
View
is set to Three Values, Six Values or Six Diagnostic
Values.
Path
Setup → Display → View 4 → 3rd Value
3.6.8.6
4th value
Description
The display
4th Process Value
can be selected.