Siemens SITRANS F - Channel 3 - Relay; Channel 4 - Input;Output

Maintenance and diagnostics
4.4 Diagnostics
FST030
Function Manual, 04/2017, A5E35693328-AA
271
4.4.3.4
Channel 3 - relay
4.4.3.4.1 Channel value (read only)
Description
The channel value can be viewed in this parameter.
Related
This parameter is only available if
Operation mode
is set to On.
Path Maintenance and diagnostics → Diagnostics → Inputs and outputs → Channel 3 - relay →
Channel value
4.4.3.5
Channel 4 - input/output
4.4.3.5.1 Operation mode (read only)
Description
The set Operation mode can be viewed in this parameter.
Setting Off; Current output; Frequency output; Pulse output; Status output; Digital input; Current
input
Default
Off
Related
In this parameter the setting of
Operation mode
is read only.
Path
Maintenance and diagnostics → Diagnostics → Inputs and outputs → Channel 4 - in-
put/output → Operation mode
4.4.3.5.2 Channel value (read only)
Description
The channel value can be viewed in this parameter.
Related
If
Operation mode
is set to Current output, this parameter will show the current output value.
If
Operation mode
is set to Frequency output, this parameter will show the frequency output
value.
If
Operation mode
is set to Pulse output, this parameter will show the pulse output value.