Siemens SITRANS F - Custom Units; Custom Conversion Factor; Decimal Places

Setup
3.3 Totalizers
FST030
88 Function Manual, 04/2017, A5E35693328-AA
Setting
Process value = Mass flow: g (grams); kg (kilograms); t (1 t = 1000 kg); STon (1 STon =
2000 lb); T (1 T = 2240 lb); oz (ounces); lb (pounds); Process value = Volume flow: l (li-
ters); hl (hectoliters); m³ (cubic meters); gal (US gallons); i.gal (Imperial gallons); BBL31.5
(1 barrel = 31.5 US gallons); BBL31 (1 barrel = 31 US gallons); BBL42 (1 barrel = 42 US
gallons); in³ (cubic inches); ft³ (cubic feet); yd³ (cubic yards);bush (bushels); Process value
= Standard volume flow: Nl (normal liters); Nm³ (normal cubic meters); Sl (standard liters);
Sft³ (standard cubic feet); Sm³ (standard cubic meters); custom units (see Custom units /
Custom conversion factor)
Default
kg (kilograms)
Related
Path
Setup → Totalizers → Totalizer 2 → Units
3.3.2.3
Custom units
Description
User specific string to define custom unit Totalizer 2 values.
Setting
-
Default
-
Related
Path
Setup → Totalizers → Totalizer 2 → Custom units
3.3.2.4
Custom conversion factor
Description
Conversion factor for user specific standard mass flow values related to SI mass units kg.
Setting
-
Default
1.0
Related
Path
Setup → Totalizers → Totalizer 2 → Custom conversion factor
3.3.2.5
Decimal places
Description
Sets the decimal places for the process value displayed in the local display.