Siemens SITRANS F - Sensor Size; Process Values; Volume Flow; Units

Setup
3.2 Process values
FST030
Function Manual, 04/2017, A5E35693328-AA
43
The wizard configures the device for use with the Siemens sensor test blocks including
sensor size and sensor path. It also allows for saving the setting.
3.1.11.2
Sensor size
Sensor size
Sensor path
A1
Path 1; Path 2
A2
Path 1; Path 2
B1
Path 1; Path 2
B2
Path 1; Path 2
B3
Path 1; Path 2
C1
Path 1; Path 2
C2
Path 1; Path 2
C3
Path 1; Path 2
D1
Path 1; Path 2
D2
Path 1; Path 2
D3
Path 1; Path 2
Save settings
After settings are complete, press the right arrow to save sensor test block settings.
3.2
Process values
3.2.1
Volume flow
3.2.1.1
Units
Description
Select units for displayed volume flow rate. Units are not applied at communication interface.