Siemens SITRANS F - Inner Pipe Diameter; Active Compensations; Active Compensations - Settings; Upstream and Downstream Conditions

Setup
3.1 Sensor settings
FST030
26 Function Manual, 04/2017, A5E35693328-AA
Setting
0.0 m to 0.01 m
Default
0.0001 m
Related
Path
Setup → Sensor settings → Pipe settings → Inner pipe roughness
3.1.2.9
Inner pipe diameter
Description
Read only. Calculated inner diameter of pipe (clamp-on).
Setting
Default
0.0 m
Related
Path
Setup → Sensor settings → Pipe settings → Inner pipe diameter
3.1.2.10
Active compensations
Description
Active compensations
3.1.2.11
Active compensations - settings
Setting
Pipe expansion due to temperature, Pipe expansion due to pressure
Default
Multiselection
Related
Path
Setup → Sensor settings → Pipe settings → Active compensations
3.1.3
Upstream and downstream conditions
3.1.3.1
Disturbed flow profile compensation
Description
Disturbed flow profile compensation enable/disable