Siemens SITRANS F - Temperature Compensation Factor; Length of Sensor Cables; Path Settings; Installed Paths

Setup
3.1 Sensor settings
FST030
Function Manual, 04/2017, A5E35693328-AA
33
Related
Path
Setup → Sensor settings → Sensor selection → Temperature code of the sensor
3.1.5.11
Temperature compensation factor
Description
Temperature compensation factors for the sensors.
Setting
0.0001 to 0.0009
Default
0.000638
Related
Path
Setup → Sensor settings → Sensor selection → Temperature compensation factor
3.1.5.12
Length of sensor cables
Description
Length of sensor cable between transmitter/DSL and any sensors. All cables must have the
same length.
Setting
0.0 m to 20.0 m
Default
0.0 m
Related
Path
Setup → Sensor settings → Sensor selection → Length of sensor cables
3.1.6
Path settings
3.1.6.1
Installed paths
Description
Bit encoded value containing installed paths for clamp-on systems.
Bit 0: Path 1 installed
Bit 1: Path 2 installed
Bit 2: Path 3 installed
Bit 3: Path 4 installed
Bit 4: Path 5 installed