Siemens SITRANS F - Volume Flow; Mass Flow

Maintenance and diagnostics
4.8 Simulation
FST030
Function Manual, 04/2017, A5E35693328-AA
293
Related
Only if process values are marked in this parameter, the setting of
Simulated value
under
each relevant process value becomes relevant.
Path Maintenance and diagnostics → Simulation → Simulation process values → Enable simula-
tion
4.8.2.2
Volume flow
4.8.2.2.1 Simulation value
Description
Set the Volume flow value to be simulated.
Setting -10800000000.0 m
3
/h to +10800000000.0 m
3
/h
Default
0.0 m
3
/h
Related
Only if Volume flow is marked in
Enable simulation
, then the setting of this parameter will be
relevant.
The range and default setting are dependent on the selected
Unit.
Path
Maintenance and diagnostics → Simulation → Simulation process values → Volume flow →
Simulation value
4.8.2.3
Mass flow
4.8.2.3.1 Simulation value
Description
Set the Mass flow value to be simulated.
Setting
-10800000000.000001 kg/h to +10800000000.000001 kg/h
Default
0.0 kg/h
Related
Only if Mass flow is marked in
Enable simulation
, then the setting of this parameter will be
relevant.
The range and default setting are dependent on the selected
Unit.
Path
Maintenance and diagnostics → Simulation → Simulation process values → Mass flow →
Simulation value