Siemens SITRANS F - Standard Volume Flow; Flow Velocity; Sound Velocity

Maintenance and diagnostics
4.8 Simulation
FST030
294 Function Manual, 04/2017, A5E35693328-AA
4.8.2.4
Standard volume flow
4.8.2.4.1 Simulation value
Description
Set the Standard volume flow value to be simulated.
Setting
-360000000.0 Nm
3
/h to +360000000.0 Nm
3
/h
Default
0.0 Nm
3
/h
Related
Only if Corrected volume flow is marked in
Enable simulation
, the setting of this parameter
will be relevant.
The range and default setting are dependent on the selected
Unit.
Path
Maintenance and diagnostics → Simulation → Simulation process values → Standard vol-
ume flow → Simulation value
4.8.2.5
Flow velocity
4.8.2.5.1 Simulation value
Description
Set the Flow velocity value to be simulated.
Setting
-400 m/s to +400 m/s
Default
0.0 m/s
Related
Only if Flow velocity is marked in
Enable simulation
, then the setting of this parameter will be
relevant.
The range and default setting are dependent on the selected
Unit.
Path
Maintenance and diagnostics → Simulation → Simulation process values → Flow velocity →
Simulation value
4.8.2.6
Sound velocity
4.8.2.6.1 Simulation value
Description
Set the Sound velocity value to be simulated.