Siemens SITRANS F - Liquident; Alarm and Warning Limits

Setup
3.2 Process values
FST030
60 Function Manual, 04/2017, A5E35693328-AA
3.2.6
LiquIdent
3.2.6.1
Alarm and warning limits
3.2.6.1.1 Upper alarm limit
Description
Exceeding this limit causes an alarm.
Setting
-9999997952 m/s to 9999997952 m/s
Default
9999997952 m/s
Related
Path
Setup → Process values → LiquIdent → Alarm and warning limits → Upper alarm limit
3.2.6.1.2 Upper warning limit
Description
Exceeding this limit causes a warning.
Setting
-9999997952 m/s to 9999997952 m/s
Default
9999997952 m/s
Related
Path
Setup → Process values → LiquIdent → Alarm and warning limits → Upper warning limit
3.2.6.1.3 Lower warning limit
Description
Falling below this limit causes a warning.
Setting
-9999997952 m/s to 9999997952 m/s
Default
-9999997952 m/s
Related
Path
Setup → Process values → LiquIdent → Alarm and warning limits → Lower warning limit