Setup
3.4 Inputs and outputs
FST030
Function Manual, 04/2017, A5E35693328-AA
193
Sensor alarms (2)
Description
Selection of alarm items that impact the output. Mainly sensor alarms. Applicable if Status
mode = Alarm item.
Setting 32 Auxiliary input; 34 Invalid flow meas.; 35 Failure on CH5 or CH6; 36 Configuration 2; 37
DSL system monitor
Setup → Inputs and outputs → Channel 4 - relay → Sensor alarms (2)
Process alarms (1)
Description
Selection of alarm items that impact the output. Applicable if Status mode = Alarm item.
Setting
96 Mass flow above alarm limit; 97 Mass flow above warning limit; 98 Mass flow below
warning limit; 99 Mass flow below alarm limit; 100 Volume flow above alarm limit; 101 Vol-
ume flow above warning limit; 102 Volume flow below warning limit; 103 Volume flow be-
low alarm limit; 104 Density above alarm limit; 105 Density above warning limit; 106
Density below warning limit; 107 Density below alarm limit; 108 Medium temp. above alarm
limit; 109 Medium temp. above warning limit; 110 Medium temp. below warning limit; 111
Medium temp. below alarm limit
Setup → Inputs and outputs → Channel 4 - relay → Process alarms (1)
Process alarms (2)
Description
Selection of alarm items that impact the output. Applicable if Status mode = Alarm item.
For hydrocarbon and gas applications only.
Setting
96 Mass flow above alarm limit; 97 Mass flow above warning limit; 98 Mass flow below
warning limit; 99 Mass flow below alarm limit; 100 Volume flow above alarm limit; 101 Vol-
ume flow above warning limit; 102 Volume flow below warning limit; 103 Volume flow be-
low alarm limit; 104 Density above alarm limit; 105 Density above warning limit; 106
Density below warning limit; 107 Density below alarm limit; 108 Medium temp. above alarm
limit; 109 Medium temp. above warning limit; 110 Medium temp. below warning limit; 111
Medium temp. below alarm limit
To Next Page
Loading...
