Siemens SITRANS F - Inputs and Outputs; Channel 1 - Output with HART; Channel 2 - Output

Maintenance and diagnostics
4.4 Diagnostics
FST030
266 Function Manual, 04/2017, A5E35693328-AA
4.4.3
Inputs and outputs
4.4.3.1
Channel 1 - output with HART
4.4.3.1.1 Loop current (read only)
Description
Output current value if configured to current output.
Options
Read only
Related
Path Maintenance and diagnostics → Diagnostics → Inputs and outputs → Channel 1 - output
with HART → Loop current
4.4.3.1.2 Error status (read only)
Description
Fault status if configured to current output.
Options Upper saturation; Lower saturation; Fail-safe behaviour active; Cable break; Loop current
deviation
Related
Path
Maintenance and diagnostics → Diagnostics → Inputs and outputs → Channel 1 - output
with HART → Error status
4.4.3.2
Channel 2 - output
4.4.3.2.1 Operation mode (read only)
Description
The set Operation mode can be viewed in this parameter.
Options
Off; Current output; Frequency output; Pulse output; Status output
Default
Current output