Siemens SITRANS F - 148 - Transm. Temp. above Alarm Limit; 149 - Transm. Temp. below Alarm Limit; Maintenance; Copy Configuration

Maintenance and diagnostics
4.3 Maintenance
FST030
Function Manual, 04/2017, A5E35693328-AA
251
Setting
Process value warning; Maintenance demanded; Maintenance required
Default
Maintenance required
Path
Maintenance and diagnostics → Diagnostic events → Assign alarm class → 15 - Path 2: No
signal
4.2.8.3
148 - Transm. temp. above alarm limit
Description
This event can be mapped to an alarm class respective NAMUR status signal.
Setting
Process value alarm (PA) resp. Out of specification; Maintenance alarm resp. Failure
Default
Process value alarm (PA) resp. Out of specification
Path
Maintenance and diagnostics → Diagnostic events → Assign alarm class → 148 - Transm.
temp. above alarm limit
4.2.8.4
149 - Transm. temp. below alarm limit
Description
This event can be mapped to an alarm class respective NAMUR status signal.
Setting
Process value alarm (PA) resp. Out of specification; Maintenance alarm resp. Failure
Default
Process alarm (PA) resp. Out of specification
Path
Maintenance and diagnostics → Diagnostic events → Assign alarm class → 149 - Transm.
temp. below alarm limit
4.3
Maintenance
4.3.1
Copy configuration
Description
Copy configuration - copy configurations from the SensorFlash to the device.
Setting
Cancel; OK
Default
Cancel