Siemens SITRANS F - 3 Rd Value; 4 Th Process Value

Setup
3.6 Local display
FST030
Function Manual, 04/2017, A5E35693328-AA
225
3.6.9.5
3rd value
Description
The display
3rd Process Value
can be selected.
Setting Volume flow; Mass flow; Flow velocity; Sound velocity; Density; Kinematic viscosity; Total-
izer 1; Totalizer 2; Totalizer 3; Pressure; Medium temperature
Default
Medium temperature
Related
This parameter is only available if
View
is set to Three Values, Six Values or Six Diagnostic
Values.
Path
Setup → Display → View 5 → 3rd value
3.6.9.6
4th process value
Description
The display
4th Process Value
can be selected.
Setting
Mass flow; Volume flow; Density; Fluid Temperature; Corrected Volume flow; Reference
Density; Totalizer 1; Totalizer 2; Totalizer 3
Default
Volumeflow
Related
This parameter is only available if
View
is set to Six Values or Six Diagnostic Values.
Path
Setup → Display → View 5 → 4th Process Value
3.6.9.7
5th process value
Description
The display
5th Process Value
can be selected.
Setting
Volume flow; Mass flow; Flow velocity; Sound velocity; Density; Kinematic viscosity; Total-
izer 1; Totalizer 2; Totalizer 3; Pressure; Medium temperature
Default
Totalizer 1
Related
This parameter is only available if
View
is set to Six Values or Six Diagnostic Values.
Path
Setup → Display → View 5 → 5th value