Siemens SITRANS F - Preset; Alarm and Warning Limits

Setup
3.3 Totalizers
FST030
Function Manual, 04/2017, A5E35693328-AA
95
3.3.3.9
Preset
Description
Reset Totalizer 3 to selected preset value.
After selecting OK the user is asked for the PRESET value. The PRESET value units
depend on the selected Process value.
Therefore the range of the Preset value is for:
● Mass flow: -9999997952 kg to +9999997952 kg
● Volume flow: -9999997952 m³ to +9999997952 m³
● Standard volume flow: -9999997952 Sm³ to +9999997952 Sm³
Setting
Cancel; OK
Default
Cancel
Related
Path
Setup → Totalizers → Totalizer 3 → Preset
3.3.3.10
Alarm and warning limits
3.3.3.10.1 Upper alarm limit
Description
Alarm is triggered if Totalizer 3 value is above the limit.
Setting Process value = Mass flow: -9999997952 kg to +9999997952 kg
Process value = Volume flow: -9999997952 m³ to +9999997952 m³
Process value = Standard volume flow: -9999997952 Sm³ to +9999997952 Sm³
Default Process value = Mass flow: +9999997952 kg
Process value = Volume flow: +9999997952 m³
Process value = Standard volume flow: +9999997952 Sm³
Related
Path
Setup → Totalizers → Totalizer 3 → Alarm and warning limits → Upper alarm limit
3.3.3.10.2 Upper warning limit
Description
Warning is triggered if Totalizer 3 value is above the limit.