Siemens SITRANS F - Trend Scale Lower Limit; Trend Scale Upper Limit; View 2; Enable or Disable

Setup
3.6 Local display
FST030
Function Manual, 04/2017, A5E35693328-AA
209
3.6.5.11
Trend scale lower limit
Description
The
Trend scale lower limit
defines the scaling lower limit of the value axis for the fixed
mode.
Setting
Default
0
Related
This parameter is only available if
Trend scale mode
is set to Fixed.
Path
Setup → Local display → View 1 → Trend scale lower limit
3.6.5.12
Trend scale upper limit
Description
The
Trend scale upper limit
defines the scaling upper limit of the value axis for the fixed
mode.
Setting options
Default setting 0
Related
This parameter is only available if
Trend scale mode
is set to Fixed.
Path
Setup → Local display → View 1 → Trend scale upper limit
3.6.6
View 2
3.6.6.1
Enable or disable
Description
In this parameter View 2 can be enabled.
Setting
Disabled; Enabled
Default
Enabled
Related
If Enabled is selected, all parameters for View 2 must be configured.
Path
Setup → Local display → View 2 → Enable or disable