Setup
3.4 Inputs and outputs
FST030
Function Manual, 04/2017, A5E35693328-AA
131
Setup → Inputs and outputs → Channel 2 - output → Status output → On delay
3.4.4.7.19 Off delay
Description
Set the time delay between resetting alarm condition and de-activating the output.
Setting 0.0 s to 100.0 s
Setup → Inputs and outputs → Channel 2 - output → Status output → Off delay
Channel 3 - input/output
3.4.5.1
Operation mode
Description
Shows the configured Operation mode. Use Change operation mode to set the mode.
Read only.
Setting
Off; Current output; Frequency output; Pulse output; Status output; Digital input; Current
Setup → Inputs and outputs → Channel 3 - input/output → Operation mode
Change operation mode
Description
Sets operation mode.
Setting
Off; Current output; Frequency output; Pulse output; Status output; Digital input; Current
To Next Page
Loading...
