Siemens SITRANS F - Suppression Time; Enable Alarms; Sensor Events (1)

Maintenance and diagnostics
4.2 Diagnostic events
FST030
Function Manual, 04/2017, A5E35693328-AA
245
Setting
• DE10 Failed to read any data related page
• DE11 Failed to read FATAL_ERROR_PAGE from
• DE12 Failed to read SHUT_DOWN_PAGE from
• DE21 The EEPROM data is inconsistent
• DE22 Inconsistency of totalizer 1 values
• DE23 Inconsistency of totalizer 2 values
• DE24 Inconsistency of totalizer 3 values
• DE26 parameter cache full
• DE27 Unsupported sensor units
• De28 Communications module not found
• DE29 Incomplete sensor connected
• DE30 Invalid sensor type
Default
Communication module not found
Path
Maintenance and diagnostics → Diagnostic events → Transmitter detailed events
4.2.6
Suppression time
Description
A coming event can be suppressed in order to prevent alarm flooding.
Setting
0 to 300 s
Default 0 s
Path
Maintenance and diagnostics → Diagnostic events → Suppression time
4.2.7
Enable alarms
4.2.7.1
Sensor events (1)
Description
Various sensor alarms can be enabled to show in the display and on the output if they occur.
Setting
05 DSL voltages; 06 DSL storage; 07 Flow measurement; 08 DSL internal; 14 Path 1: No
Signal; 15 Path 2: No signal; 16 Path 3: No signal; 17 Path : No signal; 19 Electronics
temp.; 22 Density calculation; 23 Medium temp. calc.; 24 Pressure calculation; 25 Viscosity
calculation; 26 Sensor temp. comp.; 28 Configuration 1; 31 Sensor temp.
Default
-