Siemens SITRANS F - 2.1 The Channel Setup Menu

Setup
3.2 Process values
FST030
54 Function Manual, 04/2017, A5E35693328-AA
Related
Path
Setup → Process values → Standard volume flow → Air density at standard conditions
3.2.4
Flow velocity
3.2.4.1
Units
Description
Select units for displayed flow velocity. Units are not applied at communication interface.
Units for flow velocity values.
Setting m/s (meters per second); m/h (meters per hour); in/s (inches per second); in/min (inches
per minute); ft/s (feet per second); ft/min (feet per minute); custom units (see Custom units
/ Custom conversion factor)
Default
m/s (meters per second)
Related
Path
Setup → Process values → Flow velocity → Units
3.2.4.2
Custom units
Description
User specific text string to define custom unit values. The custom unit can then be selected
in the flow velocity units.
Setting
-
Default
-
Related
Path
Setup → Process values → Flow velocity → Custom units
3.2.4.3
Custom conversion factor
Description
Conversion factor for custom unit flow velocity values based on SI velocity units m/s.
Setting
-
Default
1.0