Siemens SITRANS F - Peak Values; Process Value 1; Maximum; Timestamp at Maximum Value

Maintenance and diagnostics
4.5 Peak values
FST030
274 Function Manual, 04/2017, A5E35693328-AA
Related
Path
Maintenance and diagnostics → Diagnostics → Inputs and outputs → Calibration picture
4.5
Peak values
4.5.1
Process value 1
4.5.1.1
Process value
Description
Assign the process value to be monitored.
Setting Disabled; Volume flow; Mass flow; Standard volume flow; Sound velocity; Flow velocity;
LiquIdent; Density; Medium temperature; Pressure; Kinematic viscosity; Sensor tempera-
ture (RTD); Auxiliary temperature (RTD); Totalizer 1; Totalizer 2; Totalizer 3
Default
Disabled
Related
If this parameter is set to any other setting than Disabled, parameters
Maximum value
,
Timestamp at maximum value
,
Minimum value
,
Timestamp at Minimum value
, and
Reset
logging
will be available.
Path
Maintenance and diagnostics → Peak values → Process value 1 → Process value
4.5.1.2
Maximum
Description
Displays maximum measured value.
Related
This parameter is only available if
Process value
is
not
set to Disabled.
Path
Maintenance and diagnostics → Peak values → Process value 1 → Maximum value
4.5.1.3
Timestamp at maximum value
Description
Displays the timestamp when maximum value was measured.