Siemens SITRANS F - Section 7: THE FUE1010 EN REFLEXOR FLOWMETER; 7.1 REFLEXOR INSTALLATION STEPS

Setup
3.6 Local display
FST030
Function Manual, 04/2017, A5E35693328-AA
215
Setting Volume flow; Mass flow; Standard volume flow; Flow velocity; Sound velocity; Liquid identi-
fier; LiquIdent; Density; Kinematic viscosity; Totalizer 1; Totalizer 2; Totalizer 3; Pressure;
Medium Temperature; Standard density; Standard kinematic viscosity; API gravity;
Syandard API gravity; Specific gravity; Standard specific gravity
Default
Volume flow
Related
Path
Setup → Display → View 3 → 1st Value
3.6.7.4
Graphic scale mode
Description
Graphic scale mode
Setting
Auto; Fixed
Default
Auto
Related
Path
Setup → Display → View 3 → Graphic scale mode
3.6.7.5
2nd process value
Description
The display
2nd Process Value
can be selected.
Setting
Volume flow; Mass flow; Standard volume flow; Flow velocity; Sound velocity; Liquid identi-
fier; LiquIdent; Density; Kinematic viscosity; Totalizer 1; Totalizer 2; Totalizer 3; Pressure;
Medium Temperature; Standard density; Standard kinematic viscosity; API gravity;
Syandard API gravity; Specific gravity; Standard specific gravity
Default
Flow velocity
Related
This parameter is only available if
View
is set to Three Values, Six Values or Six Diagnostic
Values.
Path
Setup → Display → View 2 → 2nd Process Value
3.6.7.6
3rd process value
Description
The display
3rd Process Value
can be selected.