Siemens SITRANS F - Maximum; Timestamp at Maximum Value; Minimum

Maintenance and diagnostics
4.5 Peak values
FST030
278 Function Manual, 04/2017, A5E35693328-AA
Setting
Disabled; Volume flow; Mass flow; Standard volume flow; Sound velocity; Flow velocity;
LiquIdent; Density; Medium temperature; Pressure; Kinematic viscosity; Sensor tempera-
ture (RTD); Auxiliary temperature (RTD); Totalizer 1; Totalizer 2; Totalizer 3
Default
Disabled
Related
If this parameter is set to any other setting than Disabled, parameters
Maximum value
,
Maximum value timestamp
,
Minimum value
,
Minimum value timestamp
, and
Reset logging
will be available.
Path
Maintenance and diagnostics → Peak values → Process value 3 → Process value
4.5.3.2
Maximum
Description
Displays maximum measured value.
Related
This parameter is only available if
Process value
is
not
set to Disabled.
Path
Maintenance and diagnostics → Peak values → Process value 3 → Maximum value
4.5.3.3
Timestamp at maximum value
Description
Displays the timestamp when maximum value was measured.
Related
This parameter is only available if
Process value
is
not
set to Disabled.
Path
Maintenance and diagnostics → Peak values → Process value 3 → Maximum value
timestamp
4.5.3.4
Minimum
Description
Displays minimum measured value.
Related
This parameter is only available if
Process value
is
not
set to Disabled.
Path
Maintenance and diagnostics → Peak values → Process value 3 → Minimum value