Siemens SITRANS F - Decimal Places; Alarm and Warning Limits

Setup
3.2 Process values
FST030
72 Function Manual, 04/2017, A5E35693328-AA
Related
Path
Setup → Process values → Standard density → Units
3.2.11.2
Decimal places
Description
Decimal places
Setting Auto; No decimal place; 1 decimal place; 2 decimal places; 3 decimal places; 4 decimal
places; 5 decimal places; 6 decimal places
Default
2 decimal places
Related
Path
Setup → Process values → Standard density → Decimal places
3.2.11.3
Alarm and warning limits
3.2.11.3.1 Upper alarm limit
Description
Exceeding this limit causes an alarm.
Setting
0.00 kg/m³ to +10000.00 kg/m³
Default
900.00 kg/m³
Related
Path
Setup → Process values → Standard density → Alarm and warning limits → Upper alarm
limit
3.2.11.3.2 Upper warning limit
Description
Exceeding this limit causes a warning.
Setting
0.00 kg/m³ to +10000.00 kg/m³
Default
900.00 kg/m³
Related
Path
Setup → Process values → Standard density → Alarm and warning limits → Upper warning
limit