Setup
3.2 Process values
FST030
Function Manual, 04/2017, A5E35693328-AA
69
3.2.9.3.5 Hysteresis
Description
Sets the hysteresis for alarm and warning limits. The hysteresis is the distance between the
limits for activation and deactivation of an alarm/warning.
Setup → Process values → Pressure → Alarm and warning limits → Hysteresis
Medium temperature
3.2.10.1
Select units for displayed temperature. Units are not applied at communication interface.
°C (degrees Celsius); °F (degrees Fahrenheit); °R (degrees Rankine); K (kelvins)
Setup → Process values → Medium temperature → Units
Decimal places
Description
Sets the decimal places for the process value displayed in the local display.
Setting
Auto; No decimal place; 1 decimal place; 2 decimal places; 3 decimal places; 4 decimal
places; 5 decimal places; 6 decimal places
Setup → Process values → Medium temperature → Decimal places
To Next Page
Loading...
