Siemens SITRANS F - 7.3 SELECT THE TRANSDUCER MOUNTING LOCATION

Setup
3.6 Local display
FST030
216 Function Manual, 04/2017, A5E35693328-AA
Setting Volume flow; Mass flow; Standard volume flow; Flow velocity; Sound velocity; Liquid identi-
fier; LiquIdent; Density; Kinematic viscosity;Totalizer 1; Totalizer 2; Totalizer 3; Pressure;
Medium Temperature; Standard density; Standard kinematic viscosity; API gravity;
Syandard API gravity; Specific gravity; Standard specific gravity
Default
Sound velocity
Related
This parameter is only available if
View
is set to Three Values, Six Values or Six Diagnostic
Values.
Path
Setup → Display → View 3 → 3rd Process Value
3.6.7.7
4th process value
Description
The display
4th Process Value
can be selected.
Setting
Mass flow; Volume flow; Density; Fluid Temperature; Corrected Volume flow; Reference
Density; Totalizer 1; Totalizer 2; Totalizer 3
Default
Volumeflow
Related
This parameter is only available if
View
is set to Six Values or Six Diagnostic Values.
Path
Setup → Display → View 3 → 4th Process Value
3.6.7.8
5th process value
Description
The display
5th Process Value
can be selected.
Setting
Mass flow; Volume flow; Density; Fluid Temperature; Corrected Volume flow; Reference
Density; Totalizer 1; Totalizer 2; Totalizer 3
Default
Totalizer 1
Related
This parameter is only available if
View
is set to Six Values or Six Diagnostic Values.
Path
Setup → Display → View 3 → 5th Process Value