Siemens SITRANS F - HART (Channel 1); Polling Address (SW); Polling Address (HW) (Read Only); Tag

Communication
5.2 HART (Channel 1)
FST030
310 Function Manual, 04/2017, A5E35693328-AA
Related
Path
Communications → Service channel (USB) → MSD connect
5.2
HART (Channel 1)
5.2.1
Polling address (SW)
Description
Enter the device HART address. HW device address over writes SW device address.
Setting 0 to 63
Default
0
Path
Communication → HART (Channel 1) → Polling address (SW)
5.2.2
Polling address (HW) (read only)
Description
Hardware device address. The HW device address is configured by DIP switch in the device.
Path
Communication → HART (Channel 1) → Polling address (HW)
5.2.3
TAG
Description
A unique short
TAG
name for the device or measurement point can be entered.
Setting
User-configurable
Default
---------------; 8 characters (A, B, C, ... X, Y, Z, /, 1, 2, 3, ... 7, 8, 9)
Path
Communication → HART (Channel 1) → TAG