Siemens SITRANS F - Minimum Ringdown Delay; Electronic Time Delay; Configuration of Test Blocks; About

Setup
3.1 Sensor settings
FST030
42 Function Manual, 04/2017, A5E35693328-AA
Access level: Expert user only.
Setting
1 to 10
Default
5
Related
Path
Setup → Sensor settings → Miscellaneous → Number of pulses to be transmitted
3.1.10.3
Minimum ringdown delay
Description
The minimum ringdown delay is needed for optimized signal processing.
Access level: Expert user only.
Read only.
The minimum ringdown delay setting for optimized signal processing is:
2000.000122 μs
3.1.10.4
Electronic time delay
Description
The time delay induced by the DSL electronics.
Access level: Expert user only.
Read only.
The time delay induced by the DSL electronincs is:
0.519 μs
3.1.11
Configuration of test blocks
3.1.11.1
About
Description
NOTICE
Configuration data overwrite error
Running the test block configuration procedure will overwrite any existing sensor
configuration.
Do not run the test block configuration procedure if configuration data is needed. Back up
and record data as necessary.