Siemens SITRANS F - Process Density; Sensor Selection; Sensor Model; Clamp-On Sensor Size

Setup
3.1 Sensor settings
FST030
30 Function Manual, 04/2017, A5E35693328-AA
3.1.4.6
Process density
Description
Density of media used for compensation.
Input during setup.
Setting
0.0 kg/m³ to 2000.0 kg/m³
Default
1000.0 kg/m³
Related
Path
Setup → Sensor settings → Medium characteristics → Process density
3.1.5
Sensor selection
3.1.5.1
Sensor model
Description
Installed sensor model (for multi-path all must be the same). Read only. Can only be
changed via the Sensor Wizard. Indicates the Sensor model chosen from the sensor setup
wizard.
Setting
Read only: FSS200 high precision; FSS200 / 1011 Universal; FSS200 / 991 high tempera-
ture; 1011 high precision liquid
Default
FSS200 / 1011 Universal
Related
Path
Setup → Sensor settings → Sensor selection → Sensor model
3.1.5.2
Clamp-on sensor size
Description
Installed sensor size. Read only. Can only be changed via the Sensor Wizard. Indicates the
Sensor model chosen from the sensor setup wizard.
3.1.5.3
Nominal sensor frequency
Description
Nominal frequencies for the sensors