Siemens SITRANS F - Clear Diagnostic Log; Acknowledge Mode; Transmitter Detailed Events (Read Only)

Maintenance and diagnostics
4.2 Diagnostic events
FST030
244 Function Manual, 04/2017, A5E35693328-AA
4.2.3
Clear diagnostic log
Description
The diagnostic log can be reset using this parameter.
Setting
Cancel; OK
Default
Cancel
Related
When you confirm the reset by selecting OK, the
Diagnostic log
will be cleared.
Path
Maintenance and diagnostics → Diagnostic events → Clear diagnostic log
4.2.4
Acknowledge mode
Description
The system can be configured to acknowledge the alarms automatically when they are gone
(Auto), or it can be configured to require an acknowledgement from the operator (Manual).
Setting
Auto; Manual
Default
Auto
Path Maintenance and diagnostics → Diagnostic events → Acknowledge mode
4.2.5
Transmitter detailed events (read only)
Description
Transmitter Detail Alarms menu is only visible in case an alarm with detailed alarm
information is pending.