Siemens SITRANS F - 5 Communication; Service Channel (USB); USB Mode (Read Only); Auto Mode

FST030
Function Manual, 04/2017, A5E35693328-AA
309
Communication
5
5.1
Service channel (USB)
5.1.1
USB mode (read only)
Description
The
USB mode
can be read in this parameter.
Options
USB communication; Mass storage device (MSD)
Related
Path
Communications → Service channel (USB) → USB mode
5.1.2
Auto mode
Description
The
Auto mode
can be enabled/disabled. When auto mode is enabled, a device connected
via a USB cable is always considered an MSD.
Setting
Disabled; Enabled
Default
Related
Path Communications → Service channel (USB) → Auto mode
5.1.3
MSD connect (write only)
Description
This command is used to connect/disconnect to a mass storage device (for example: a PC).
Setting
Do nothing; Connect; Disconnect
Default
Do nothing