Siemens SITRANS F - View 3; Enable or Disable; View; 1 St Value

Setup
3.6 Local display
FST030
214 Function Manual, 04/2017, A5E35693328-AA
3.6.7
View 3
3.6.7.1
Enable or disable
Description
In this parameter View 3 can be enabled.
Setting
Disabled; Enabled
Default
Enabled
Related
If Enabled is selected, all parameters for View 3 must be configured.
Path
Setup → Display → View 3 → Enable or disable
3.6.7.2
View
Description
The display View 3 can be configured.
Setting
Single value; Three values; Totalizer; Dosing; 1 value and bargraph; 1 value and graph;
Six values; Six diagnostic values; Alarm list
Default
1 value and bargraph
Related
If Single value or Dosing is selected,
1st process value
must be configured.
If Three values is selected,
1st process value
,
2nd process value
and
3rd process value
must be configured.
If Totalizer or 1 value and graph is selected,
1st process value
,
Trend scale mode
and
Trend
log time window
must be configured.
If 1 value and bargraph is selected,
1st process value
must be configured.
If Six values or Six diagnostic values is selected,
1st process value
,
2nd process value
,
3rd
process value
,
4th process value
,
5th process value
, and
6th process value
must be
configured.
Path
Setup → Display → View 3 → View
3.6.7.3
1st value
Description
The display
1st Process Value
can be selected. This process value is shown in all view
types.