Siemens SITRANS F - HOW TO USE THE Windows HyperTerminal PROGRAM

Setup
3.6 Local display
FST030
Function Manual, 04/2017, A5E35693328-AA
229
Related
This parameter is only available if
View
is set to Three Values, Six Values or Six Diagnostic
Values.
Path
Setup → Display → View 6 → 2nd Process Value
3.6.10.5
3rd process value
Description
The display
3rd Process Value
can be selected.
Setting Mass flow; Volume flow; Density; Fluid Temperature; Corrected Volume flow; Reference
Density; Totalizer 1; Totalizer 2; Totalizer 3
Default
Fluid Temperature
Related
This parameter is only available if
View
is set to Three Values, Six Values or Six Diagnostic
Values.
Path
Setup → Display → View 6 → 3rd Process Value
3.6.10.6
4th process value
Description
The display
4th Process Value
can be selected.
Setting
Mass flow; Volume flow; Density; Fluid Temperature; Corrected Volume flow; Reference
Density; Totalizer 1; Totalizer 2; Totalizer 3
Default
Volumeflow
Related
This parameter is only available if
View
is set to Six Values or Six Diagnostic Values.
Path
Setup → Display → View 6 → 4th Process Value
3.6.10.7
5th process value
Description
The display
5th Process Value
can be selected.
Setting
Mass flow; Volume flow; Density; Fluid Temperature; Corrected Volume flow; Reference
Density; Totalizer 1; Totalizer 2; Totalizer 3
Default
Totalizer 1