Siemens SITRANS F - 3.2 MOUNTING TEMPERATURE SENSORS

Setup
3.4 Inputs and outputs
FST030
Function Manual, 04/2017, A5E35693328-AA
163
Setting
195 CH2 loop cur. in lower saturation;
196 CH2 loop cur. in upper saturation;
197 CH2 cable break;
198 CH2 output frequency too low;
199 CH2 output frequency too high;
200 CH2 pulse overflow;
201 CH3 loop cur. in lower saturation;
202 CH3 loop cur. in upper saturation;
203 CH3 cable break;
204 CH3 output frequency too low;
205 CH3 output frequency too high;
206 CH3 pulse overflow;
207 CH4 loop cur. in lower saturation;
208 CH4 loop cur. in upper saturation;
209 CH4 cable break;
210 CH4 output frequency too low;
211 CH4 output frequency too high;
212 CH4 pulse overflow;
214 Channel 2 simulated;
215 Channel 3 simulated;
216 Channel 4 simulated;
217 Process values frozen;
218 All outputs forced;
219 CH2 loop current deviation;
220 CH3 loop current deviation;
221 CH4 loop current deviation;
222 Invalid register mapping;
223 Invalid coil configuration
Default
None
Related
Path
Setup → Inputs and outputs → Channel 3 - relay → Input/output alarms
3.4.6.14
Input/output alarms (2)
Description
Selection of alarm items that impact the output. Applicable if Status mode = Alarm item.
Availability of certain settings depends on Hardware and Software configuration.
3.4.6.15
Input/output alarms (2) - settings
Setting
186 CH3 input current too low; 187 CH3 input current too high; 188 CH3 external failure;
189 CH4 input current too low; 190 CH4 input current too high; 191 CH4 external failure
Default
None