Setup
3.3 Totalizers
FST030
Function Manual, 04/2017, A5E35693328-AA
89
Setting Auto; No decimal place; 1 decimal place; 2 decimal places; 3 decimal places; 4 decimal
places; 5 decimal places; 6 decimal places
Setup → Totalizers → Totalizer 2 → Decimal places
Totalizer 2 direction.
Forward and backward; Forward; Backward; Hold
Setup → Totalizers → Totalizer 2 → Direction
Fail safe behaviour
Description
Behavior of the totalizer during the occurrence of bad input value.
Setting
RUN; totalization is continued using the bad input value; HOLD; totalization is stopped;
MEMORY; totalization is continued based on the last incoming good value
RUN; totalization is continued using the bad input value
Setup → Totalizers → Totalizer 2 → Fail safe behaviour
Reset totalizer to zero.
Setup → Totalizers → Totalizer 2 → Reset
To Next Page
Loading...
