Siemens SITRANS F - Section 6: OPERATING FUE1010 EN WITH FLOW TUBES; 6.1 GENERAL INSTALLATION GUIDELINES

Setup
3.6 Local display
FST030
Function Manual, 04/2017, A5E35693328-AA
203
In view 1 only measurement or diagnostic views can be selected. In views 2 to 6 all view
types can be selected.
Measurement views
● Single value
● Three values
● 1 value and bargraph
● 1 value and graph
● Six values
Operation view
● Totalizer
Alarm view
● Alarm list
Diagnostic view
● Six diagnostic values
3.6.1
Brightness
Description
Adjust backlight level to improve local display conditions.
Setting
0%; 10%; 20%; 30%; 40%; 50%; 60%; 70%; 80%; 90%; 100%
Default
50%
Related
Path
Setup → Local display→ Brightness
3.6.2
Backlight
Description
Select between always on or backlight switch-off after 10 minutes..
Setting
Automatic; Always on
Default
Automatic (30 s)