Siemens SITRANS F - Channel 4 - Input;Output

Maintenance and diagnostics
4.8 Simulation
FST030
290 Function Manual, 04/2017, A5E35693328-AA
Setting
0; 1
Default
0
Related
Only if parameter
Simulation
is set to Enabled, then the setting of this parameter will be
relevant.
Path
Maintenance and diagnostics → Simulation → Simulation inputs and outputs → Channel 3 -
relay → Simulation value
4.8.1.5
Channel 4 - Input/output
4.8.1.5.1 Operation mode
Description
Set the output functionality you want the channel to operate.
Setting
Off; Current output; Frequency output; Pulse output; Status output; Digital input; Current
input
Default
Off
Related
The setting of this parameter affects the setting options in parameter
Simulation value.
Path
Maintenance and diagnostics → Simulation → Simulation inputs and outputs → Channel 4 -
input/output → Operation mode
4.8.1.5.2 Simulation
Description
Enables or disables simulation of Channel 4 input/output.
Setting
Disabled; Enabled
Default
Disabled
Related
Only if this parameter is set to Enabled, then the setting of parameter
Simulation value
will
be relevant.
Path
Maintenance and diagnostics → Simulation → Simulation inputs and outputs → Channel 4 -
input/output → Simulation