Siemens SITRANS F - Totalizer 3 Units; Damping; Damping Value

Communication
5.2 HART (Channel 1)
FST030
Function Manual, 04/2017, A5E35693328-AA
319
Default
kg
Totalizer 2 Process value is set to Mass flow
Setting
Metric:
l, hl, m
3
,
US:
gal; i.gal; BBL31.5; BBL31; BBL42; in
3
; ft
3
; yd
3
; bush
Default
l
Totalizer 1 Process value is set to Volume flow
Related
Path
Communication → HART (Channel 1) → HART units → Totalizer 2 units
5.2.8.12
Totalizer 3 units
Description
The totalizer 3 units for the communication interface can be configured. The unit is not
applied at the local display.
Setting
Metric:
g (grams); kg (kilograms); t (1 t = 1000 kg)
US STon (1STon = 2000 lb); T ( 1 T = 2240 lb); oz (ounces); lb
(pounds)
Default
kg
Totalizer 3 Process value is set to Mass flow
Setting
Metric:
l, hl, m
3
,
US:
gal; i.gal; BBL31.5; BBL31; BBL42; in
3
; ft
3
; yd
3
; bush
Default
l
Totalizer 3 Process value is set to Volume flow
Related
Path
Communication → HART (Channel 1) → HART units → Totalizer 3 units
5.2.9
Damping
5.2.9.1
Damping value
Description
The filter time constant can be configured. The constant defines the damping value of the
Modbus communication signal.