Siemens SITRANS F - Channel 4 - Relay; Operation Mode; Status Mode; Sensor Alarms (1)

Setup
3.4 Inputs and outputs
FST030
192 Function Manual, 04/2017, A5E35693328-AA
3.4.8
Channel 4 - relay
3.4.8.1
Operation mode
Description
Select the operation mode for the relay output.
Setting
Off; Status output
Default
Status output
Related
Path
Setup → Inputs and outputs → Channel 4 - relay → Operation mode
3.4.8.2
Status mode
Description
Select the functionality for the status output.
Setting
Alarm class; Alarm item
Default Alarm class
Related
Path
Setup → Inputs and outputs → Channel 4 - relay → Status mode
3.4.8.3
Sensor alarms (1)
Description
Selection of alarm items that impact the output. Mainly sensor alarms. Applicable if Status
mode = Alarm item.
Setting
05 DSL voltages; 06 DSL Storage; 07 Flow measurement; 08 DSL internal; 09 Oil Density;
10 Oil Viscosity; 11 Oil spec. gravity; 14 Path 1: No signal; 15 Path 2: No signal; 16 Path 3:
No signal; 17 Path 4: No signal; 19 Electronics temp.; 22 Density calculation; 23 Medium
temp. calc.; 24 Pressure calculation; 25 Viscosity calculation; 26 Sensor temp. comp.; 28
Configuration 1
Default
None
Related
Path
Setup → Inputs and outputs → Channel 4 - relay → Sensor alarms (1)