Siemens SITRANS F - Page 193

Setup
3.4 Inputs and outputs
FST030
Function Manual, 04/2017, A5E35693328-AA
191
3.4.7.10.14 Fail-safe behaviour
Description
Reaction in case of a fault at the current input.
Setting
Last valid value; Fail-safe value
Default
Last valid value
Related
Path
Setup → Inputs and outputs → Channel 4 - input/output → Current input → Fail-safe behav-
iour
3.4.7.10.15 Fail-safe value
Description
Input value in case of a fault and when fail-safe behaviour is configured to Fail-safe value.
Applicable if process value = Fail-safe value.
Setting
-
Default
0.0 Pa
Related
Path
Setup → Inputs and outputs → Channel 4 - input/output → Current input → Fail-safe value
3.4.7.10.16 Fail-safe minimum time
Description
Minimum time the input stays in fail-safe mode.
Setting
0 s to 100 s
Default
0 s
Related
Path
Setup → Inputs and outputs → Channel 4 - input/output → Current input → Fail-safe mini-
mum time